Flow Rate Calibration Ultrasonic Flow Measurement TF1100-CH
Transition time ultrasonic flowmeter working method. The battery is
rechargeable for 14 hours, and the 4-line backlight display makes
the reading more intuitive. The clamp-on ultrasonic sensor (sensor)
is installed on the outer surface of the pipeline and is used for
non-invasive and non-invasive flow measurement of the liquid and
liquefied gas filled in the pipeline. Three pairs of sensors are
sufficient to cover the most common pipe diameter ranges. The user
can hold and operate the flow meter host by hand. This flexible and
easy-to-use flow meter is an ideal tool to support service and
maintenance activities. It can also be used to control or even
temporarily replace permanently installed instruments.
Flow Rate Calibration Ultrasonic Flow Measurement TF1100-CH
Features:
1.14 hours battery (rechargeable), back-lit 4 lines display.
2.Can be used for mobile measurement, flow rate calibration, data
comparing, meters running status checking.
3.Non-invasive transducers.
4.Data logger function.
5.Wide bi-directional flow range of 0.01 m/s to 12 m/s. Wide liquid
temperature range: -35℃~200℃.
Flow Rate Calibration Ultrasonic Flow Measurement Applications:
Chemical industry -chlorine, alcohol, acids, .thermal oils.etc
Water and waste water industry - hot water, cooling water, potable
water, sea water etc.)
Petrochemical industry
Refrigeration and air conditioning systems
Metallurgy and mining applications
Food , beverage and pharmaceutical industry
Power supply- nuclear power plants, thermal & hydropower plants),
heat energy boiler feed water.etc
Mechanical engineering and plant engineering-pipeline leak
detection, inspection, tracking and collection.
General
● Service and maintenance
● Support of commissioning process and installation
● Replacement of defective devices
● Performance and efficiency measurement
- Evaluation and assessments
- Capacity measurement of pumps
- Monitoring of regulating valves
Specifications: Transmitter
| Measurement principle | Ultrasonic transit-time difference correlation principle |
| Resolution | 0.25mm/s |
| Repeatability | 0.2% of reading |
| Accuracy | ±1.0% of reading at rates >0.3 m/s);±0.003 m/s of reading at
rates<0.3 m/s |
| Response time | 0.5s |
| Flow velocity range | 0.01 to 12 m/s, bi-directional |
| Sensitivity | 0.003m/s |
| Damping of displayed value | 0-99s(selectable by user) |
| Liquid Types Supported | both clean and somewhat dirty liquids with turbidity <10000 ppm |
| Power Supply | AC: 85-265V Up to 14 h with fully charged internal batteries |
| Enclosure type | Handheld, Portable |
| Degree of protection | IP65 according to EN60529 |
| Housing material | ABS( UL 94HB) |
| Operating temperature | -20℃ to +60℃ |
| Display | 4 line×16 English letters LCD graphic display, backlit |
| Units | User Configured (English and Metric) |
| Rate | Rate and Velocity Display |
Specifications: Transducer
| Degree of protection | IP65 according to EN60529.(IP67 or IP68 Upon request) |
| Pipe diameter range | 20-50mm for type S, 40-1000mm for type M, 1000-6000mm for type L |
| Material of transducer | Aluminum for standard temp. sensor, and peek for high temp. sensor |
| Suited Liquid Temperature | Std. Temp.: -35℃~85℃ for short periods up to 120℃ |
| High Temp.: -35℃~200℃ for short periods up to 250℃ |
| Transducer Size | Type S 48(h)*28(w)*28(d)mm |
| Type M 60(h)*34(w)*33(d)mm |
| Type L 80(h)*40(w)*42(d)mm |
| Cable Length | Std: 5m |
Data sheet download TF1100-CH
transit-time handheld ultrasonic flowmet...
Manual Download TF1100-CH
transit-time handheld flowmeter Manual.p...
Dimensional Sketches
Transmitter:
Transducer:
With years of export experience along with excellent quality,
advanced services and competitive prices, Lanry has won numerous
customers' trust and support. With years of export experience along
with excellent quality, advanced services and competitive prices,
Lanry has won numerous customers' trust and support.
Delivery
Clamp On Handheld Ultrasonic Flow Meter TF1100-CH for water and
chilled water application
Standard meter: 3-7 days
Special meter: pls contact us
Express, by air, by sea can be optional.
